Name: Feuling Race Series Short Travel Hydraulic Lifters - Standard 4050ST
SKU: P108620393
Availability: InStock

Feuling Race Series Short Travel Hydraulic Lifters – Standard 4050ST

$150.00 ~~$299.99~~

New revolutionary design with 0.115in. of total travel vs. a full travel lifter with 0.200in.These lifters will increase rpm by decreasing valve float and valve-train harmonics while maintaining a quiet engineTravel reduction reduces the amount of oil that

Payment:

Description
Reviews (0)

New revolutionary design with 0.115in. of total travel vs. a full travel lifter with 0.200in.
These lifters will increase rpm by decreasing valve float and valve-train harmonics while maintaining a quiet engine
Travel reduction reduces the amount of oil that is required to fill the inside of the lifter which reduces oil aeration in the lifter on steep, fast action high lift camshaft lobes
Short travel lifters should be set with 0.065in. – 0.070in. of preload and with the normal engine growth from heat will put the operating lifter pre-load at or around half travel
Short travel lifters are designed to limit the amount of oil needed to fill the internals of the lifter which results in less oil needed compared to a full travel or other style short travel lifters
Design drastically reduces aeration of the oil producing a fully filled lifter when the lifter rolls around to the front cam lobe ramp vs. having aerated oil and then the pushrod seat dropping when the lifter hits the front cam ramp after squeezing the aeration
Machined from a steel body and designed to exceed the needs of large lift camshafts and higher valve spring pressures with a slower bleed down rate
Precision ground needle roller bearing with high chromium steel axle for long life and minimal friction
Cold forged extra long piston, precision ground and fitted for controlled leak down and pump up
High-flow disc style quick reacting check valve for better reaction at higher rpm
Race Series lifters maintain proper oil flow to the top end, increase engine rpm, valve-train stability, decreasing valve float promoting maximum valve lift
Feuling recommends Race Series lifters for engines running higher than 185 lbs. valve spring seat pressure
Feuling recommends the use of a high volume oil pump which will result in quieter, better performing lifters
Race Series lifters are compatible with either Feuling HP+ or Race Series oil pumps and are designed for use with both street and strip engines
Spin-Tron dyno developed and track proven
Available in standard and o

Reviews

There are no reviews yet.

Be the first to review “Feuling Race Series Short Travel Hydraulic Lifters – Standard 4050ST”

Feuling Race Series Short Travel Hydraulic Lifters – Standard 4050ST

Reviews

Related products

Hot Cams Stage 2 Intake Camshaft 4089-2IN

Hot Cams Stage 2 Exhaust Camshaft 4055-2E

Hot Cams Cam Chain HC92RH2010110

Feuling OE+ Hydraulic Cam Chain Tensioner Conversion Kit 7089